Harting Connectors Competitive Alternative
Connectors as per DIN 41612 IEC 60603-2
Load free insertion and withdrawal. The connectors are mainly used in devices and module frames with 19" technology. The male connectors are fixed on the module frames bonded with the female connectors fixed in the rear part of the module frame.
2E offers connectors type D and F for signal transmission and current transmission up to 6A (at 20°C). For current transmission up to 20 A there is a great variety of models type H available. As mixed connectors types F and H15 of connectors type F24H7 can be used.
Type E-L12
Connectors as per DIN 41612 Type F
Technical data:
· Maximum contacts: 48
· Air leakage distance contact to contact: > 1,6 mm
· Air leakage distance contact to ground: > 3,5 mm
· Creepage distance contact to contact: > 3,0 mm
· Creepage distance contact to ground: > 6,0 mm
· Operating current at 20°C: 6 A
· Test voltage contact to contact: 1550 V
· Test voltage contact to ground: 2500 V
· Contact resistance: < 15 mOhm
· Insertion and withdrawal forces: < 90 N
· Operating temperature: -55 to +125°C
· Mating class: 2
· Flammability: UL94V-0
· Contact surface mating area: gold plated
· Contact surface termination area: tin plated
Connectors as per DIN 41612 Type H11
Technical data:
· Maximum contacts: 11
· Air leakage distance contact to contact: > 4,5 mm
· Air leakage distance contact to ground: > 4,5 mm
· Creepage distance contact to contact: > 8,0 mm
· Creepage distance contact to ground: > 8,0 mm
· Operating current at 20°C: 20 A
· Test voltage contact to contact: 3100 V
· Test voltage contact to ground: 3100 V
· Contact resistance: < 8 mOhm
· Insertion and withdrawal forces: < 90 N
· Operating temperature: -55 to +125°C
· Mating class: 1
· Flammability: UL94V-0
· Contact surface mating area: silver plated
· Contact surface termination area: silver plated
